You can contact us 24/70 800 300-353
Best Discounts
The best discounts this week
Every week you can find the best discounts here.
- Classic 6 Stage Analog Phaser designed by Citadel
- Offset control allows for Vibe Style sounds
- Footswitch can be used as a momentary switch for selective phasing
- True Bypass mode for authentic sound preservation
- Mono input and output configuration
- Powered by 9 Volt DC (not battery-operated), with a consumption of 100 mA
- Suitable for both acoustic guitars and bass instruments
- Compact dimensions: 62 x 58 x 114 mm, weighing 0.25 kg
- British Crunch and High Gain distortion pedal
- Analog design with effective built-in Noise Gate
- Features Level, Gate, Tone, and Drive controls
- Three selectable modes: Classic, Balanced, and Modern
- True Bypass mode for enhanced signal clarity
- Mono input and output configuration
- 9 VDC power supply required (not battery-operated)
- Compact and lightweight design (62mm, 0.25 kg)
- Modern interpretation of the legendary Tube Driver overdrive pedal, favored by David Gilmour and Eric Johnson
- Features a high voltage tube preamp with automatic BIAS adjustment
- Offers dynamic, touch-sensitive overdrive sounds controllable via guitar volume and picking strength
- Control knobs include Level, Tone, Body, Girth, and Gain
- True Bypass mode for maintaining signal integrity
- Powered by 9V DC with a current consumption of 500 mA; battery operation not available
- Medium-sized housing dimensions: 136 x 58 x 88 mm; weighs 0.5 kg
- Boutique effect produced in China
- Adaptive Noise Gate for effective noise control
- Analog design with mono input and mono output
- Features a Threshold control knob and two operational modes
- Soft/hard switch for customizable gate response
- Buffered bypass mode for seamless signal integrity
- Requires 9V DC power supply (center negative), with a consumption of 150 mA
- Not battery operable; suitable for bass instruments as well
- Compact dimensions: 62 x 58 x 114 mm, weighing 0.25 kg, produced in China
- Inspired by vintage SSL style mix bus compressors
- Analog VCA compressor with classic, round compression sounds
- Features Makeup control to compensate for volume loss during gain reduction
- Automatic release adjustment based on input signal
- Side Chain High Pass Filter (SC HPF) to reduce compression for bass frequencies
- True bypass mode for unaltered signal when off
- Dimensions: 62 x 58 x 114 mm; weight: 0.25 kg
- Suitable for both acoustic guitar and bass applications
- Product Name: Brian May Vision Natural
- Design: Combines classic elegance with modern playability, inspired by the "Red Special"
- Body: Chambered mahogany body with a natural wood top for warm resonance
- Neck: One-piece mahogany neck with Coromandel ebony fretboard and 24 medium jumbo frets
- Pickups: Two vintage-voiced humbuckers for a versatile tone, from clean to crunchy
- Controls: Simple layout with a 3-way toggle switch, volume, and tone knobs
- Hardware: Features a wraparound bridge and locking tuners for excellent tuning stability
- Extras: Includes a gig bag; made in South Korea
- Model: Brian May Vision Antique Cherry
- Design: Classic elegance with modern playability, inspired by the "Red Special"
- Body: Chambered mahogany body for warm, resonant sound
- Neck: One-piece mahogany neck with Coromandel ebony fretboard, 24 medium jumbo frets
- Pickups: Two vintage-voiced Humbuckers for versatile tones, featuring a simple control layout (3-way switch, volume, tone)
- Hardware: Wraparound bridge and locking tuners for excellent tuning stability and sustain
- Aesthetics: Antique Cherry color with 6-ply pinstripe binding
- Included: Gigbag for protection and transport
- Polyphonic pitch shifter with advanced algorithms for rapid response and minimal latency.
- Offers 6 octaves of shifting: 3 octaves up and 3 down, with no glitch artifacts on high octaves.
- Features a Detune mode for authentic double tracking effects and a Shift Up function to simulate a capo.
- Internal footswitch with toggle or momentary modes for versatile performance options.
- Compatible with an optional expression pedal or dual footswitch for interval switching.
- Buffered bypass mode and powered by 9V DC (center negative) with a current draw of 120 mA.
- Compact dimensions (73 x 59 x 129 mm) and lightweight design (0.41 kg).
- Suitable for both acoustic guitars and bass instruments.
- 1 x 12" speaker cabinet designed for ST. James tops
- Made from lightweight Candlenut plywood for durability
- Features a custom-designed Celestion Zephyr speaker for powerful sound
- Power rating: 100 W
- Impedance: 16 Ohm, Mono configuration
- Half Open Back construction for enhanced tonal qualities
- Equipped with 2x 1/4" input jacks
- Includes a lit logo powered by 9 Volt DC, weighing 12.8 kg and produced in China
- Collaboration with Sean Long from the metalcore band "While She Sleeps"
- Solid Alder body with a Neon Pink gloss finish
- Maple neck with a Speed Neck profile and hand-rubbed satin urethane finish
- Equipped with EMG 66 (neck) and EMG 57 (bridge) active humbucker pickups
- 22 jumbo frets on a compound radius maple fretboard
- Charvel HT6 hardtail bridge and black hardware for durability
- 3-way pickup selector switch and single volume control
- Made in Mexico with a string gauge of .009 - .042
- Polyphonic pitch shifter with ultra-fast response and minimal latency.
- Features new pitch shift algorithms for glitch-free high octave performance.
- Offers a pitch range of +/- 4 octaves and a detune mode for double tracking effects.
- Adjustable response time and storage for 30 user presets.
- Equipped with a graphic LCD display for parameter monitoring.
- Includes TRS MIDI interface and USB-C connectivity.
- Constructed in a durable metal housing; dimensions: 147 x 72 x 230 mm; weight: 1.7 kg.
- Suitable for acoustic guitar and bass applications.
- First Roland drum machine with true analog sound generation in over 40 years, featuring 16 circuits from TR-808 and TR-909.
- Combines vintage analog sounds with advanced digital capabilities using ACB technology for detailed sound modeling and new sonic textures.
- Extensive sampling tools including stereo-sampling, BPM sync, time-stretching, and a 64 GB internal storage with 2,000 samples.
- Rich effects selection with an analog State Variable Filter, drive circuit, and numerous digital effects for enhanced sound design.
- Modern sequencer with fluid programming, real-time recording, and off-grid capabilities for intricate groove creation.
- Intuitive interface with hands-on control, featuring high-quality knobs, faders, and a Morph-Slider for dynamic performance adjustments.
- Versatile connectivity options including USB-C audio/MIDI interface, multiple outputs, and synchronization capabilities with MIDI and DIN.
- Future-proof design with robust DSP and firmware, supporting updates and new sound engines for long-term use.
- Affordable single cutaway model from Gretsch’s Streamliner series
- Body made of mahogany with a maple top, finished in gloss polyester
- Bolt-on mahogany neck with an Indian Laurel fretboard and 22 medium jumbo frets
- Equipped with a powerful Gretsch HotWire™ ceramic humbucker pickup
- Classic Jet Black color with cream single-layer binding
- Features a 3-way toggle pickup selector and controls for volume and tone
- Die-cast sealed tuners and chrome hardware for durability
- Made in China, with a scale length of 24.875" (632 mm) and a nut width of 1.6875" (42.86 mm)
- Polyphonic Envelope Effect: Features a "Slow Gear" style for volume swells and fade-ins.
- Type: Digital effects pedal.
- Inputs/Outputs: Mono In, Mono Out configuration.
- Controls: Includes Volume, Attack, Frequency, and Modulation knobs.
- Modes: Offers 3 distinct modes for versatile sound shaping.
- Bypass Mode: Buffered Bypass for seamless integration.
- Power Requirements: Operates on 9 - 9.6 Volt DC (center negative) with a current draw of 100 mA; battery operation not available.
- Compact Design: Mini housing dimensions of 51 x 51 x 93 mm and lightweight at 0.54 kg.
- Compact and powerful monitor controller ideal for professional project and home studios.
- Offers three input options: balanced XLR/TRS combo jacks, AUX input, and Bluetooth connectivity.
- Features illuminated source and output selection buttons with LED displays for easy operation.
- Two stereo outputs and a separate mono output for versatile speaker configurations.
- Includes practical functions like Mono switch, Dim, and Mute for quick workflow adjustments.
- Separate adjustable headphone output with Pre-Fader Listening (PFL) functionality.
- Maintains a fully analog signal path for authentic, latency-free audio playback.
- Dimensions: 218 x 76 x 124 mm; Weight: 0.91 kg; includes external power supply.
- Compact passive volume controller for various audio setups
- Simplifies volume control compared to digital options on laptops and audio interfaces
- Connects easily between audio interface and active speakers via RCA inputs/outputs
- Fully passive design requires no power supply, ensuring latency-free sound
- Features a mono switch for easy monitoring of mix compatibility
- Desktop form factor with a black plastic and steel housing
- Dimensions: 86 x 39 x 66 mm; Weight: 0.12 kg
- Controls include a volume knob and a mono switch, with one input channel available
- Portable tabletop microphone absorber system
- Features three foldable segments for easy storage
- Includes an adjustable tabletop stand
- Halved design for effective sound absorption
- Ideal for studio and home studio applications
- Reduces room influence and sound reflections during recording
- Constructed from a chrome-plated steel frame and high-density acoustic foam
- Dimensions: 210 x 380 x 200 mm; Weight: 0.84 kg; Includes absorber and stand
- Marca Unic Jazz Alto-Sax Reed, strength 2.0
- Designed for alto saxophone use
- Made from hybrid natural and synthetic fibers
- Offers high flexibility and exceptional projection
- Suited for jazz, funk, and rock music styles
- Resistant to climatic and humidity changes
- Can last up to 6 months
- Each package contains 1 piece, produced in France
- Marca Unic Elite Tenor-Sax reed, strength 2.0
- Designed for tenor saxophone
- Made from hybrid natural and synthetic fibers
- Offers easy response and precise articulation
- Produces a clear, soloistic projection
- Resistant to climatic and humidity changes
- Lasts up to 6 months
- Sold individually, produced in France
- Product: Marca Unic Elite Alto-Sax 2.5 reed
- Designed for: Alto Saxophone
- Material: Hybrid natural and synthetic fibers
- Strength: 2.5
- Features easy response and precise articulation
- Produces a clear, soloist projection sound
- Resistant to climatic and hygrometric changes
- Shelf life of up to 6 months; comes in a single unit packaging
- Country of manufacture: France
- High-quality Over-Ear headphones designed for professional use
- Closed-back design provides excellent noise isolation of 23 dB(A)
- Unique 'M'-shaped Al/Mg 40 mm drivers for enhanced stiffness and sound quality
- Frequency response range of 5 Hz to 22 kHz for detailed audio reproduction
- Sensitivity of 100 dB and impedance of 26 Ohm suitable for mobile and studio use
- Lightweight (306 g) with ergonomic memory foam ear cushions for comfort during extended listening
- Comes with two detachable cables (1.2 m straight and 3.0 m coiled) and a 3.5 mm to 6.3 mm adapter
- Includes a protective case for easy transport and storage
- Marca Unic Classic Alto-Sax reed, strength 2.5
- Designed for alto saxophone
- Made from a hybrid of natural and synthetic fibers
- Suitable for classical and traditional music styles
- Produces a homogeneous, natural sound
- Resistant to climatic and humidity changes
- Longevity of up to 6 months
- Sold individually, produced in France
- Lightweight yet sturdy hybrid case for Strat and Tele guitars
- Made from durable, water-resistant 600 Denier nylon exterior
- Protective EPS foam core guards against impacts
- Soft plush lining prevents scratches on the instrument's finish
- Removable padded shoulder strap for easy transport
- Designed specifically for ST and T-style guitars
- Includes accessory pocket for added convenience
- Secure zipper closure for safe storage
- Designed for German clarinets, compatible with Böhm reeds.
- Produces a round, warm, and carrying tone with excellent intonation.
- Inspired by renowned mouthpieces from the 1920s, enhanced with modern technology.
- Made from high-quality Ebonite, with rubber rods pressed in Germany.
- Black MCR-15G is fully pigmented for a sleek appearance.
- Manufactured using advanced CNC machines with diamond-tipped tools for precision.
- Features a medium opening (1.18 mm) and medium-long baffle.
- Includes mouthpiece only; produced in the USA.
- Designed for German clarinet, compatible with Böhm reeds
- Made from high-quality marbled ebonite
- Features a medium tip opening (1.18 mm) and medium-long facing
- Offers a round, warm, and resonant tone
- Inspired by classic mouthpieces from the 1920s, enhanced with modern technology
- Precision-produced using CNC machines with diamond-tipped tools
- Delivers excellent intonation across all registers
- Manufactured in the USA
- Closed-back, over-ear design suited for studio applications
- Frequency response range of 5 Hz to 24 kHz with 45 Ohm impedance for clear sound
- Compatible with modern smartphones via USB-C to 3.5 mm audio adapter
- Comfortable velour ear pads and padded headband for extended wear
- Detachable, single-sided spiral cable (1.3 - 3.0 m) for flexibility
- Includes 3.5 mm to 6.3 mm adapter, USB-C adapter, and transport bag
- Lightweight at only 194 g for comfortable use
- Low total harmonic distortion (< 0.04 %) and effective noise isolation (19 dBA)
- Mobile audio interface with desktop design
- Compatible with macOS, iOS, and Windows operating systems
- Supports 2 simultaneous input channels with 2 XLR mic inputs
- Features a 6.3 mm Hi-Z input (Channel 2) and a 6.3 mm stereo headphone output
- Balanced line outputs (2x 6.3 mm) and no S/PDIF coaxial I/O
- Offers direct monitoring and has LED indicators
- Maximum sample rate of 192 kHz and resolution of 24 bit
- Comes with interface, connection cable, and software; weighs 0.45 kg and measures 158 x 47 x 102 mm
- Lightweight adapter (0.01 kg)
- Converts from mono jack socket to mini mono jack
- Made with durable plastic housing
- Sleek black color design
- Ideal for audio connections
- Product title: Adam Hall Connectors 4 STAR A MF2 JM2
- Weight: 0.01 kg
- Type: Adapter
- Connector type: Monophonic jack to mini mono jack socket
- Material: Plastic housing
- Color: Black
- USB audio interface in a desktop form factor
- Compatible with macOS, iOS, and Windows operating systems
- Supports 6 simultaneous input channels: 4 XLR/TRS combo and additional line inputs
- Includes 2 Hi-Z inputs and 2 headphone outputs (6.3 mm)
- Features 6 balanced line outputs and MIDI I/O (1 In / 1 Out)
- Supports direct monitoring and onboard digital effects
- Maximum sample rate of 192 kHz and resolution of 32 Bit
- Comes with necessary cables and software; powered by external power supply or USB
- Stylish bottle opener key chain featuring the iconic Tama Iron Cobra design
- Made from durable, nickel-plated brass material
- Compact size: 33 mm x 145 mm x 2.5 mm, perfect for easy portability
- Ideal for drummers and fans of the Tama brand
- Practical tool for opening beverages at gigs, BBQs, or daily use
- Easily attaches to your keychain for convenience
- A cool accessory that showcases your passion for music and great sound
- Essential gadget for staying prepared for refreshments on the go
- USB audio interface designed for desktop use.
- Compatible with macOS, iOS, and Windows operating systems.
- Features 2 simultaneous input channels: 2x XLR mic inputs and 2x XLR/TRS combo line inputs.
- Hi-Z input available on channel 2 for instruments.
- 6.3 mm stereo headphone output and 2x 6.3 mm balanced line outputs.
- MIDI I/O with 1 In and 1 Out, and supports direct monitoring.
- Maximum sample rate of 192 kHz and resolution of 32-bit.
- Includes onboard digital effects and comes with interface, connection cables, and software.
- Mobile audio interface for desktop use
- Compatible with macOS, iOS, and Windows operating systems
- Supports 2 simultaneous input channels with 2 XLR mic inputs
- Hi-Z input available on channel 2 (6.3 mm jack)
- 6.3 mm stereo headphone output and 2 balanced 6.3 mm line outputs
- Direct monitoring feature included; no onboard effects
- Max sampling rate of 192 kHz and resolution of 24 bit
- Compact design (158 x 47 x 102 mm) and weighs only 0.45 kg; includes interface, connection cables, and software
- Mobile audio interface designed for desktop use
- Compatible with macOS, iOS, and Windows operating systems
- Two simultaneous input channels: XLR mic input (Ch 1) and 6.3 mm Hi-Z input (Ch 2)
- 6.3 mm stereo headphone output and balanced line outputs (2x 6.3 mm)
- Supports direct monitoring and features LED indicators
- Maximum sample rate of 192 kHz and resolution of 24 bit
- Powered by an external power supply or USB
- Includes interface, connection cable, and software; weighs 0.45 kg and measures 158 x 47 x 102 mm
- Vintage-inspired Tama Superstar Classic Neo-Mod Kit with modern construction technology
- Includes 20"x10" Bass Drum, 12"x7" Tom, and 14"x9" Floor Tom
- Unique 10" deep Bass Drum for clear attack and powerful sound
- Shellset configuration, does not include snare drum
- Made from high-quality maple with a chromed hardware finish
- Finished in a stunning Metallic Gold Duco color
- Includes hardware and tom holder; cymbals and snare drum sold separately
- Product code: CL30VS-MLD; manufactured in China
- Vintage-inspired Tama Superstar Classic Neo-Mod Kit with modern construction technology.
- Includes a 20"x10" Bass Drum, 12"x7" Tom, and 14"x9" Floor Tom.
- Special 10" deep Bass Drum provides clear attack and powerful sound.
- Shellset configuration without a snare drum; ideal for versatile playing situations.
- Made from high-quality maple with chrome hardware and a painted finish.
- Color: Seafoam Green; includes tom holder and necessary hardware.
- Note: Hardware, cymbals, and snare drum shown are not included.
- Product Code: CL30VS-SFG; manufactured in China.
- Product Title: Tama Superstar Classic CK32RZS-NET Natural Ebony Tiger Wrap Shellset
- Type: Shellset with hardware included
- Configuration: Studio drumset
- Bass Drum Size: 22" x 18" (no mount)
- Tom Size: 12" x 8"
- Floor Tom Size: 16" x 16"
- Shell Material: Maple with chrome hardware
- Finish: Natural Ebony Tiger wrap
- Note: Cymbals not included; comes with tom holder only.
- Limited Edition: Celebrating the 50th anniversary of Hello Kitty with a special release.
- Color & Finish: Gloss white finish with a matching headstock and custom Hello Kitty graphics on the pickguard.
- Body & Neck: Solid ST-style body made of Okoume, with a Maple neck featuring a "C" profile.
- Hardware: Equipped with a Fender Designed Alnico Humbucker, chrome hardware, and Squier vintage-style tuning machines.
- Specifications: 6-string configuration, 21 frets, 25.5" scale length, and a 9.5" fretboard radius made of Maple.
- Included Accessories: Comes with a custom gig bag for protection and transport.
- Production: Manufactured in China as a special limited model.
- Limited edition drum kit inspired by Lars Ulrich, celebrating 40 years of collaboration with TAMA.
- Features a striking Electric Yellow finish with black nickel hardware.
- Includes a complete shell set with hardware, designed for affordability and usability.
- Specifications:
- Bass Drum: 2x 22" x 18"
- Tom 1: 10" x 7"
- Tom 2: 12" x 8"
- Floor Tom 1: 14" x 12"
- Floor Tom 2: 16" x 14"
- Snare Drum: 14" x 6.5"
- Crafted for durability and reliability, embodying the spirit of Lars' 72-Seasons Tour Kit.
- Product Code: IP72ZH9WBN; manufactured in China.
- Unique Artwood Top design with camouflage finish
- JB-style solid body made from Alder wood
- Longscale 34" (864 mm) neck with a bolt-on construction
- One-piece maple neck with a rosewood fretboard featuring 22 frets
- Four-string bass equipped with a Sandberg Blacklabel Split-Coil P-style pickup
- Controls include 1 volume and 1 tone knob
- Finished with black chrome hardware and includes a gig bag
- Weighs 3.50 kg and made in Germany
- Unique Artwood Top California VS-4 Shortscale bass introduced at Guitar Summit 2025
- JB-Style body shape made from Alder with a striking Italian Artwood top
- Solid body construction with a bolt-on neck design
- Shortscale length of 30" (762 mm) featuring a roasted maple neck
- Pau Ferro fretboard with 22 frets and a 4-string configuration
- Equipped with a Sandberg Blacklabel Split-Coil P-Style pickup and simple controls (1x Volume, 1x Tone)
- Finished with Pearl Black hardware and includes a gig bag
- Weighs 3.29 kg and proudly made in Germany
- Top model of Roland's V-Drums 5 series, combining acoustic aesthetics with modern electronic performance.
- Full-size wooden shells and high-quality digital pads for an authentic drumming experience.
- Designed for ambitious drummers seeking traditional looks without sacrificing electronic advantages.
- Suitable for live performances, studio recordings, and home practice with detailed sound expression.
- Equipped with the V51 drum sound module featuring over 1000 sounds and 70 user drum kits.
- Extensive effects options including layer EQ, pad compression, and overhead mic simulation.
- 4.3" graphic color LCD display for user-friendly navigation.
- Note: Kick drum pedal, snare stand, and hi-hat stand are not included.
- Roland VAD316 V-Drums Kit combines acoustic drum feel with advanced electronic technology.
- Features flat wooden tom shells and a full-size bass drum for a classic setup experience.
- Equipped with the V31 sound module offering over 1000 sounds and 130 preset kits.
- Includes innovative coaching tools and wireless connectivity for easy playing and learning.
- Ideal for practice at home, live performances, or studio recordings.
- Trigger inputs support multiple configurations with a DB-25 connection and digital trigger options.
- 4.3" graphic color LCD display for easy navigation and settings adjustment.
- Package excludes foot pedal and hi-hat stand.
- Roland TD516 is a mid-range kit in the V-Drums 5 series, offering high-quality sound and flexibility.
- Features larger dimensions and optimized playability, suitable for drummers seeking an enhanced playing experience.
- Includes digital pads for snare, ride, and hi-hat, along with a larger kick pad.
- Ideal for studio recording and live performance, providing extensive dynamic control and realistic feel.
- Equipped with over 1,000 sounds and 130 preset drum kits, plus 70 user kits.
- 4.3" graphic color LCD display for easy navigation and settings adjustment.
- Connectivity options include multiple trigger inputs, direct outputs, MIDI, and SD card for data backup.
- Note: Does not include foot pedal or hi-hat controller.
- High-end V-Drums sound and feel in a compact design, ideal for home, studio, or casual jamming.
- Features the powerful V31 module with advanced sound technology similar to the top-tier V71 model.
- Updated pads and precise cymbal triggers provide a realistic and satisfying playing experience.
- Learning, improvisation, and sound development are enhanced with Bluetooth audio, Wi-Fi, and integrated coaching system.
- Drum sound module includes over 1,000 sounds, 70 user kits, and 130 preset kits.
- Extensive effects include pad compressors, equalizers, room types, reverb, multieffects, and more.
- Equipped with a 4.3" graphic color LCD display and supports SD card for backup.
- Connectivity options include MIDI OUT, USB audio/MIDI, and various outputs; note: does not include foot pedal.
- Compact and accessible entry-level V-Drums kit combining professional sound and expressive performance.
- Features newly designed Tom pads for enhanced playability and a highly responsive Snare.
- Equipped with the expandable V51 sound module, offering an authentic drumming experience.
- Comes with over 1,000 sounds and 130 preset drum kits, plus 70 user-configurable kits.
- Includes a comprehensive range of effects such as EQ, compression, and reverb for customizable sound.
- 4.3" graphic color LCD display for easy navigation and control.
- Supports various input and output options, including MIDI and SD card for data backup.
- Note: Does not include kick pedal or hi-hat controller.
- Compact V-Drums kit ideal for limited spaces, offering a professional playing experience.
- Optimized pads with two crash cymbals and a VH-10 hi-hat on a dedicated stand for an authentic feel.
- V31 sound module features advanced technology from the V71 model for dynamic performance.
- Over 1000 sounds available with 70 user-defined and 130 preset drum kits.
- Comprehensive effects including layer transient, equalizers, and overhead mic simulation.
- 4.3" graphic color LCD display for easy navigation and settings adjustment.
- Connectivity options include MIDI out, USB audio/MIDI, and a line-in for external devices.
- Note: Foot pedal and hi-hat controller not included in the package.
- Enhanced V PRO series of PROEL active loudspeakers with advanced DSP engine for smooth response and high-resolution sound.
- Features 5 selectable EQ presets (Music, Live, DJ, Monitor, Speak) for versatile application adaptation.
- Lightweight and portable design with a robust 600 W Class-D amplifier in a compact housing.
- Unique Italian design with a convenient suitcase-style handle for easy transport and a slanted shape for use as stage monitors.
- Equipped with MIC/LINE inputs and optional wireless USB input for PROEL U24 microphone systems.
- Specifications include a 10" woofer, 1" neodymium compression driver, 90° H x 60° V dispersion, and a maximum SPL of 123 dB.
- Dimensions: 330 x 512 x 280 mm; weight: 9.9 kg (21.8 lb); constructed from durable polypropylene.
- Compact USB-MIDI controller with 25 velocity-sensitive mini keys
- Ideal for musicians, producers, and DJs on the go
- Lightweight design, perfect for fitting in a backpack or laptop bag
- Plug & play functionality; no driver installation required
- Includes octave up/down, transpose, and arpeggiator features
- Compatible with Windows XP or higher and macOS 10.3 or higher
- Dimensions: 346 x 53 x 97 mm; Weight: 0.47 kg
- Comes with USB cable for easy connectivity
- 22" diameter (55.88 cm) polyphonic crash cymbal
- Made from B20 bronze for enhanced durability and sound quality
- High-gloss polished finish for a clear, warm tone with bright overtones
- Excellent defined ping with medium sustain
- Handmade craftsmanship ensures quality and uniqueness
- Product code: B22POR-B
- Manufactured in Turkey
- 20" (50.8 cm) medium-weight crash cymbal
- Made from B20 bronze alloy for enhanced durability
- Features a brilliant, high-gloss finish
- Produces clear, warm tones with bright overtones
- Offers a medium sustain for versatile sound
- Handcrafted in Turkey for quality craftsmanship
- Product code: B20POC-B
- Includes one cymbal per order
- 18" (45.72 cm) medium-weight polyphonic crash cymbal
- Made from B20 bronze for enhanced durability and sound quality
- Features a brilliant, high-gloss finish for a striking appearance
- Produces clear, warm tones with bright, brilliant overtones
- Offers a medium sustain, suitable for various musical styles
- Handmade in Turkey ensuring quality craftsmanship
- Product code: B18POC-B
- Includes one cymbal per package
- 10" (25.40 cm) diameter polyphonic splash cymbal
- Made from B20 bronze for superior quality
- High-gloss polished finish for a brilliant and bright sound
- Thin thickness for quick and explosive response
- Produces a fine, clear sound that cuts through in mixes
- Handcrafted in Turkey for exceptional craftsmanship
- Product code: B10POS-B
- Sold as a single piece
- Title: Meinl Byzance Brilliant B15POH-B Polyphonic Hi-Hat 15"
- Finish: High-gloss polished finish
- Diameter: 15 inches (38.10 cm)
- Manufacturing: Handcrafted
- Alloy: B20 Bronze
- Thickness: Medium
- Includes: 1 pair
- Country of Production: Turkey
- Product: Marca Unic Jazz Tenor-Sax Reed, strength 2.5
- Suitable for: Tenor saxophone
- Material: Hybrid natural and synthetic fibers
- Features high flexibility and expressive sound with exceptional projection
- Designed for modern styles including jazz, funk, and rock
- Resistant to climatic and humidity changes
- Longevity: up to 6 months
- Packaging: Sold as a single unit
- Country of production: France
- Model: Jackson American Series Rhoads RR24 HT SWH
- Body: Solid Mahogany with Alder finish; color: Snow White, satin finish
- Neck: 3-piece maple, through-body construction, Speed Neck profile, 24 stainless steel jumbo frets
- Scale Length: 25.5" (648 mm) with a 12"-16" compound radius ebony fingerboard
- Pickups: Seymour Duncan SH-1N (neck) and TB-4 (bridge), H-H configuration, passive
- Hardware: Hipshot hardtail bridge, Gotoh locking tuners, black hardware
- Controls: 1 volume, 1 tone, 3-way toggle switch
- Includes: Soft case; made in the USA
- AI Machine Modeling™: Utilizes IK Multimedia's advanced AI technology for hyperrealistic bass sounds.
- 150 Bass Presets: Comes with 150 specifically designed presets featuring modeled amps, cabinets, and effects.
- Customizable Sound: Allows users to capture and transfer their own bass rigs using the included TONEX MAX software.
- Versatile Effects: Features 7 configurable effect blocks (e.g., Delay, Chorus, Reverb) for diverse sound shaping.
- High-Quality Audio: Equipped with ultra-low noise 24-bit/192 kHz converters and a wide frequency response (5 Hz – 24 kHz).
- Connectivity Options: Includes USB audio interface, MIDI In/Out, expression pedal input, and multiple output options.
- True/Soft Bypass: Offers both true bypass and soft bypass modes for flexible signal routing.
- Compact Design: Floorboard format with dimensions of 176 mm x 55 mm x 142 mm and weighs 906 g.
- Compact and durable mini-pedal designed for guitarists and bassists.
- Features over 20,000 free sound models and hundreds of premium collections on IK Tone.net.
- Delivers the same high sound quality as the larger TONEX PEDAL.
- Includes 20 factory-selectable sound models, customizable via TONEX Librarian.
- Offers 3 assignable preset slots with two modes: "Dual Mode" for A/B switching and "Stomp Mode" for classic ON/Bypass.
- Equipped with a quick tuner using LED indicators for easy tuning.
- Functions as an audio interface for recording or jamming.
- Direct access to controls for gain, bass, mids, treble, gate, compressor threshold, reverb mix, and volume.
- Model: Ibanez J.Custom RG8570EM-NT, showcasing exceptional Japanese craftsmanship.
- Body: Made from African Mahogany with a striking Exotic Maple top.
- Neck: 5-piece Maple/Wenge with RG J Custom Super Wizard profile, featuring a 24-jumbo fret Rosewood fingerboard.
- Pickups: Equipped with DiMarzio HSH set (Air Norton, True Velvet, Tone Zone) for versatile sound options.
- Tremolo: Features the reliable Ibanez Lo-Pro Edge tremolo system.
- Hardware: Gold hardware with Gotoh MGT locking tuners and natural binding.
- Finish: High gloss polyurethane with a natural color, solid body construction.
- Included: Comes with a case and multitool for maintenance.
- Model: Gretsch Guitars Streamliner Jet Duo Tone Burst
- Body: Solid Mahogany with Maple top and Single Cutaway design
- Neck: Bolt-on Mahogany neck with Indian Laurel fingerboard and 22 medium jumbo frets
- Pickups: Dual Gretsch HotWire™ High Output Ceramic Humbucker for powerful sound
- Finish: Gloss Polyester in a stylish Duo Tone Burst
- Controls: 1 Volume and 1 Tone knob with a 3-way toggle switch
- Bridge: Gretsch Compensated Wrap-Around bridge for enhanced tuning stability
- Origin: Manufactured in China
- Model: Gretsch Guitars Streamliner Jet Club
- Finish: Aged White, high gloss Polyester
- Body: Solid Mahogany with Single Cutaway design
- Neck: Bolt-on Mahogany neck with Indian Laurel fingerboard
- Fretboard: 22 Medium Jumbo frets, 12" radius, Pearloid Neo-Classic inlays
- Pickups: Dual Gretsch HotWire™ High Output Ceramic Humbuckers
- Controls: 1 Volume and 1 Tone, 3-way toggle switch
- Hardware: Chrome, including Gretsch Die-Cast Sealed tuners and Compensated Wrap-Around bridge
- Limited edition Gretsch Falcon Center Block in Vintage White.
- Semi-hollow body design with a center block to reduce feedback.
- Equipped with Bigsby Tremolo and Grover Locking tuners for enhanced tuning stability.
- Features two TV Jones Classic Humbuckers for the signature Gretsch sound.
- High-quality construction with laminated maple body and high gloss finish.
- 22 medium jumbo frets on an ebony fretboard with pearloid inlays.
- Gold hardware and unique gold plexi pickguard with Black Falcon™ graphic.
- Includes a case for protection and storage.
- Limited Edition 4th Gen Focusrite Scarlett 2i2, celebrating 40 years of Focusrite with a stylish blue aluminum casing and gold knobs.
- Features high-quality converters from the Focusrite RedNet series with a dynamic range of 120 dB and detailed microphone preamps with 69 dB gain.
- Equipped with dual instrument/line inputs, rear XLR inputs, and a powerful headphone output with separate volume control.
- Includes modern features like dynamic gain halos for precise gain control, auto gain, and clip-safe modes for optimal recording.
- Comes with an extensive software bundle, including Ableton Live Lite, Avid® Pro Tools® Artist, and the Hitmaker Expansion collection.
- USB-powered audio interface compatible with macOS, iOS, and Windows, offering a maximum sample rate of 192 kHz and 24-bit resolution.
- Loopback feature for creating samples with virtual inputs and easy remote control of preamps using Focusrite Control 2.
- Backed by a 3-year warranty and award-winning customer service.
- Over-ear design with an open construction for enhanced sound quality
- Features a new 40 mm magnesium driver for improved dynamics and precision
- Offers a linear frequency response range of 5 Hz to 28 kHz
- High sensitivity of 104 dB and 55 Ohm impedance, suitable for high-end audio mastering
- Weighs 450 g, designed for comfort with perforated microfiber ear pads
- Removable cables with a length of 5.0 m, includes a 3.5 mm stereo jack and adapter to 6.3 mm
- Comes with a carrying case, replacement pads, spiral cable, and straight cable
- Recognized as a reference headphone for high-end mixing and mastering due to its neutral sound and depth precision
- Classic 60's Stratocaster from the limited edition Roadworn Vintera II series
- Body made of alder with a high gloss black nitrocellulose lacquer finish
- Bolt-on maple neck with a '60s "C" profile and aged high gloss finish
- Equipped with three Fender Vintage-Style '60s single-coil pickups
- Vintage-style hardware including a synchronized tremolo and Kluson-style tuners
- Features a 5-way pickup selector, 1 volume knob, and 2 tone knobs
- Comes with a 3-ply mint green pickguard and black dot inlays on the fingerboard
- Includes a gig bag and hex key for setup; manufactured in Mexico
- Limited Edition Fender Vintera II Roadworn 60s Telecaster in Burgundy Mist Metallic finish.
- Classic 60's styling with Road Worn aging and Nitrocellulose lacquer.
- Solid Alder body with T-Style shape and High Gloss finish.
- Bolt-on Maple neck with Early 60's C profile, 21 vintage tall frets, and Rosewood fretboard.
- Equipped with Fender Vintage-Style '60s Single-Coil pickups and 3-way selector switch.
- Features a vintage 3-saddle Tele bridge with slotted steel saddles and Kluson style tuners.
- Includes a 3-ply mint green pickguard and chrome hardware.
- Ships with a case and comes from Mexico.
- Limited Edition Fender Vintera II Roadworn 50s Jazzmaster in Fiesta Red
- Solid Alder body with Road Worn Nitrocellulose Lacquer finish
- Maple neck with Late '50s "C" profile and Slab Rosewood fretboard
- Classic 6 Saddle Jazzmaster Bridge with Floating Tremolo and Kluson Style tuners
- Equipped with two Fender Vintage-Style '50s Single-Coil pickups
- Features 21 vintage tall frets, 7.25" fretboard radius, and synthetic bone nut
- Includes a gig bag and hex key for adjustments
- Made in Mexico with nickel/chrome hardware and 1-Ply Gold Anodized Aluminum pickguard
- Product Title: Fender Hello Kitty Fuzz Black
- Effect Type: Fuzz with an analog design
- Special Edition: Limited edition celebrating Hello Kitty's 50th anniversary
- Sound Range: Offers dark, grungy fuzz, singing violin fuzz, and broken splatter sounds
- Control Features: Includes Tone, Level, and Fuzz knobs
- Bypass Mode: True Bypass for signal integrity
- Power Supply: Operates on 9 Volt DC (center negative) with a consumption of 80 mA; battery operation possible with 9 V block
- Dimensions: Standard size (62 x 56 x 112 mm) and designed in black with Hello Kitty logo and Japanese writing
- Classic Vintage Telecaster design with modern features and playability
- Faded Dakota Red finish with high gloss urethane coating
- Solid alder body with a bolt-on maple neck and rosewood fingerboard
- 22 medium jumbo frets with a 9.5" radius and modern "C" neck profile
- Equipped with Fender Coastline® '63 Single-Coil pickups for authentic tone
- Nickel/chrome hardware, including staggered tuning machines and a 3-saddle bridge
- Includes Fender Deluxe Gigbag and necessary hex keys for setup
- Made in the USA, featuring 6-string configuration and 25.5" scale length
- Classic Vintage Telecaster look with modern features and playability
- Solid alder body with a high gloss finish in Faded Lake Placid Blue
- Bolt-on maple neck with a Modern "C" profile and satin finish
- 22 medium jumbo frets on a maple fingerboard with a 9.5" radius
- Equipped with Fender Coastline '63 Single-Coil pickups and a 3-way switch
- Vintage-style 3-saddle Tele bridge with slotted brass barrel saddles
- Includes Fender Deluxe Gigbag and necessary hex keys for setup
- Made in the USA with nickel/chrome hardware and a 3-ply mint green pickguard
- Classic Vintage Telecaster design with modern features and playability
- Faded Sherwood Green Metallic finish with high gloss body
- Solid alder body and bolt-on maple neck with Modern "C" profile
- 22 medium jumbo frets on a maple fingerboard with 9.5" radius
- Equipped with Fender Coastline '63 Single-Coil pickups (neck and bridge)
- Vintage-style 3-saddle Tele bridge with slotted brass barrel saddles
- Includes Fender Deluxe Gigbag and necessary hex keys for setup
- Made in the USA, string gauge .009 - .042, nickel/chrome hardware
- Classic Vintage Telecaster design combined with modern features and playability.
- Solid Alder body with a Butterscotch Blonde high gloss finish.
- Bolt-on Maple neck with a Modern "C" profile and 9.5" fretboard radius.
- Equipped with Fender Coastline '63 Single-Coil pickups for authentic Tele sound.
- 22 medium jumbo frets on a Maple fretboard with black dot inlays.
- Nickel/Chrome hardware and Fender 3-Saddle Vintage-Style bridge with brass saddles.
- Includes Fender Deluxe Gigbag and necessary hex keys for adjustments.
- Made in the USA with a 25.5" scale length and 6-string configuration.
- Model: Fender American Professional Classic Stratocaster RW FBLK
- Finish: Faded Black with High Gloss Urethane
- Body: Solid Alder with ST-Style shape
- Neck: Bolt-on Maple with Modern "C" profile and 22 medium jumbo frets
- Fingerboard: Rosewood with a 9.5" radius and White Dot inlays
- Pickups: Three Fender Coastline '57 Single-Coil pickups with 5-way switch
- Bridge/Tremolo: Vintage-Style Synchronized Tremolo with 6 saddles
- Accessories: Includes Fender Deluxe Gigbag and hex wrenches for setup
- Classic Vintage Stratocaster look with modern features and playability
- Body: Solid Alder, finished in High Gloss Faded Dakota Red
- Neck: Bolt-on Maple with a Modern "C" profile and 9.5" fingerboard radius
- Fingerboard: Rosewood with 22 medium jumbo frets and white dot inlays
- Pickups: Three Fender Coastline '57 Single-Coil pickups with aged white covers
- Bridge: Fender 6-Saddle Vintage-Style Synchronized Tremolo
- Includes Fender Deluxe Gigbag and necessary tools for setup
- Made in the USA with nickel/chrome hardware and staggered tuners
- Classic Vintage Stratocaster look with modern features and playability
- Body: Alder with a solid ST-style design, finished in Faded Lake Placid Blue
- Neck: Bolt-on Maple neck with a Modern "C" profile, 22 medium jumbo frets, and a 9.5" radius
- Pickups: Three Fender Coastline '57 Single-Coil pickups with a 5-way switch
- Bridge: Fender 6-Saddle Vintage-Style Synchronized Tremolo for authentic performance
- Hardware: Nickel/Chrome with staggered Kluson-style tuners
- Includes Fender Deluxe Gigbag and necessary tools for setup
- Made in the USA, factory strings: Fender Nickel Plated Steel (.009 - .042)
- Classic Vintage Strat look with modern features and playability
- Body: Solid Alder with High Gloss finish, color Faded Firemist Gold
- Bolt-on Maple neck with Modern "C" profile and 9.5" radius fretboard
- Equipped with Fender Coastline '57 Single-Coil pickups (3x S-S-S)
- Vintage-style 6-Saddle Synchronized Tremolo and staggered Kluson-style tuners
- 22 medium jumbo frets on Maple fretboard with black dot inlays
- Includes Fender Deluxe Gigbag and necessary hex keys for setup
- Made in the USA with Nickel/Chrome hardware and aged white pickup covers
- Classic 3-Tone Sunburst finish with high gloss urethane coating
- Solid Alder body with a bolt-on Maple neck and modern "C" profile
- 22 medium jumbo frets on a Maple fingerboard with a 9.5" radius
- Equipped with Fender Coastline '57 Single-Coil pickups (S-S-S configuration)
- Vintage-style hardware including a 6-saddle synchronized tremolo and staggered tuners
- Includes Fender Deluxe Gigbag and necessary tools for setup
- Made in the USA, designed for contemporary playability while retaining vintage aesthetics
- Model: Fender American Professional Classic Stratocaster HSS MN
- Color: Faded Lake Placid Blue with High Gloss Urethane finish
- Body: Solid Alder with ST-Style shape and bolt-on Maple neck
- Neck Profile: Modern "C" with a 9.5" radius and 22 Medium Jumbo frets
- Pickups: Combination of Fender Coastline '57 Single-Coil pickups and a Coastline Humbucker
- Hardware: Nickel/Chrome with vintage-style 6-saddle synchronized tremolo
- Controls: 5-way pickup selector, 1 volume, and 2 tone knobs
- Included Accessories: Fender Deluxe Gigbag and hex keys for adjustments
- Model: Fender American Professional Classic P-Bass RW 3-TSB
- Body: Solid Alder, P-Style shape with a glossy 3-Color Sunburst finish
- Neck: Bolt-on construction with a comfortable Modern "C" profile, made of Maple with a Rosewood fingerboard
- Scale Length: 34" (864 mm) with 20 frets and white dot inlays
- Pickup: Fender Coastline® '60 Split Single-Coil Precision Bass pickup for classic tone
- Hardware: Nickel/Chrome with 1 volume and 1 tone control
- Strings: 4-string setup with factory gauge of .045 - .105
- Includes: Gigbag for transport and storage; made in the USA
- Precision Bass from the American Professional Classic Series
- Alder body with a Faded Sherwood Green Metallic finish
- Maple neck with a comfortable Modern "C" profile and rounded fretboard edges
- 20 frets on a rosewood fretboard, featuring white dot inlays
- Equipped with a Fender Coastline® '60 Split Single-Coil Precision Bass pickup
- Solid body construction with a longscale (34") neck
- Includes nickel/chrome hardware and comes with a gig bag
- Made in the USA
- Contemporary version of the classic Precision Bass from the American Professional Classic series.
- Features an alder body and a maple neck with a comfortable Modern "C" profile.
- Equipped with a Fender Coastline® '60 Split Single-Coil Precision Bass pickup for authentic tone.
- Solid body construction with a P-Style shape and high-gloss Faded Lake Placid Blue finish.
- 20 frets on a maple fingerboard with white dot inlays; longscale length of 34" (864 mm).
- Hardware made of nickel/chrome; includes 1 volume and 1 tone control knob.
- Comes with a gig bag and made in the USA.
- Short scale bass designed for players with smaller hands and beginners.
- Offset body made from alder with a glossy 3-Color Sunburst finish.
- Features a bolt-on maple neck with a comfortable 9.5" radius.
- Equipped with a Fender Coastline Mustang Bass pickup and a Master Greasebucket tone circuit.
- 30" scale length with 19 frets and rosewood fingerboard adorned with white dot inlays.
- Lightweight and easy to handle, ideal for versatile playing styles.
- Includes a gig bag for easy transport and protection.
- Made in the USA, combining classic design with modern features.
- Classic Mustang Bass design, ideal for players with smaller hands and beginners.
- Offset body made from solid Alder for enhanced comfort and playability.
- Short scale length of 30" with a comfortable 9.5" radius maple neck.
- Equipped with a Fender Coastline® Mustang Bass® pickup and Master Greasebucket Tone Circuit.
- Features 19 frets, white dot inlays, and nickel/chrome hardware.
- Finished in Faded Dakota Red with a high-gloss finish.
- Includes a gig bag for easy transportation.
- Made in the USA, showcasing quality craftsmanship.
- Classic vintage design with modern features from the American Professional Series
- Solid Alder body with a bolt-on Maple/Rosewood neck
- Faded Firemist Gold high-gloss finish
- Long scale length of 34 inches (864 mm) with 20 frets
- Equipped with Fender Coastline® '66 Single-Coil Jazz Bass® pickups
- Master Greasebucket™ Tone Circuit for versatile tone control
- Nickel/Chrome hardware and classic "Lollipop" tuners
- Includes a gig bag for convenient transport
- Classic Vintage Design with Modern Features
- Solid Alder Body with Gloss Finish in 3-Color Sunburst
- Bolt-On Maple Neck with Rosewood Fingerboard (20 Frets)
- Equipped with Fender Coastline® '66 Single-Coil Pickups
- Master Greasebucket™ Tone Circuit for versatile sound control
- Longscale Neck (34" / 864 mm) with White Dot Inlays
- Nickel/Chrome Hardware with Vintage Style Bridge
- Includes a Case for Secure Storage and Transport
- Classic Vintage design with modern features
- Alder body with a bolt-on maple neck
- Vintage style bridge and "Lollipop" tuning machines
- Equipped with Fender Coastline® '66 Single-Coil Jazz Bass® pickups
- Master Greasebucket™ tone circuit for tone control
- Longscale 34" neck with 20 frets and white dot inlays
- Comes in Faded Dakota Red with a glossy finish
- Includes gig bag for transport and storage
- Classic Jazzmaster design with offset body shape in 3-Tone Sunburst finish
- Features Fender Coastline 65 Single Coil pickups for iconic sound and twang
- Ergonomically designed solid body with deep cutaway for enhanced playability
- 22 medium jumbo frets on a maple neck with a modern "C" profile
- Equipped with a vintage-style floating tremolo and Mustang saddles for versatile tremolo effects
- Includes Fender Deluxe Gigbag and necessary hex wrenches for maintenance
- Made in the USA with high-quality materials, including alder body and rosewood fretboard
- 6-string configuration with a total scale length of 25.5 inches (648 mm)
- Model: Fender American Professional Classic Jaguar RW FFMG
- Body: Solid Alder with Faded Firemist Gold finish and High Gloss lacquer
- Neck: 24" Short Scale, Bolt-On Maple neck with a Modern "C" profile and Rosewood fretboard
- Pickups: Fender Coastline '62 Jaguar Single-Coils (2) with a 3-way toggle switch
- Hardware: Nickel/Chrome, including Fender Jaguar Bridge with Mustang Saddles and Vintage Style Floating Tremolo
- Additional Features: 22 Medium Jumbo frets, 9.5" fretboard radius, and 1.68" synthetic bone nut width
- Accessories: Comes with a Fender Deluxe Gigbag and necessary hex keys
- Made in the USA
- Hybrid design combining elements of Stratocaster and Telecaster.
- Solid Alder body with a Faded Lake Placid Blue urethane finish.
- Bolt-on Maple neck with a Modern "C" profile and satin finish.
- Equipped with three Fender single-coil pickups: two Tele neck and bridge, one Strat middle.
- 22 medium jumbo frets on a Maple fingerboard with a 9.5" radius.
- Vintage-style 3-saddle Tele bridge with brass saddles for enhanced tone.
- Includes a 5-way pickup selector switch, one volume, and one tone control.
- Comes with a Fender Deluxe gig bag and necessary hex keys for setup.
- 30' (914 cm) coil instrument cable
- Co-branded with Jack White's Third Man Hardware
- Retro and vintage aesthetic with modern performance
- High-quality sound and spiral shielding for studio and stage use
- Yellow PVC jacket with Third Man Hardware logo
- Features 1/4" mono plugs on both ends
- Signature cable inspired by Jack White's artistic style
- Made in China
- Product Title: EVH 5150 Iconic 15W EL34 Head
- Power: 15 Watts, with option to reduce to 1/4 power
- Channels: 2 (Clean/Overdrive and High Gain) with shared tone control
- Features: Serial FX loop, Headphone out, XLR Line Out with speaker simulation, Mini Aux input
- Tubes: 2x ECC83 preamp tubes and 1x EL34 power tube
- Controls: Bass, Mid, Treble, Presence, and Resonance for sound shaping
- Included Accessories: 2-button footswitch
- Dimensions: 50.1 x 25.9 x 21.6 cm; made in Indonesia
- Includes 2 EVE Audio EXO 27 nearfield monitors and 1 EVE Audio TS108 subwoofer.
- EXO 27 features a 6.5" woofer for extended bass response and a balanced, detailed sound profile.
- Utilizes the new EXO Precision AirMotion tweeter and GDC Waveguide for precise sound dispersion and spatial imaging.
- Optimized low-diffraction enclosure design minimizes edge reflections for clearer audio playback.
- Ideal for professional producers and sound engineers needing high sound levels and reliability.
- TS108 subwoofer includes an 8" driver, delivering deep bass down to 29 Hz with low distortion.
- Features a Smart-Knob for easy adjustment of parameters from the sweet spot, along with remote control.
- Dimensions: EXO 27 (234 x 344 x 280 mm), TS108 (280 x 415 x 365 mm) with a total weight of 11.5 kg.
- Includes 2 EVE Audio EXO 27 nearfield monitors and 2 Stand Art Studio Monitor stands.
- The EXO 27 features a 6.5" woofer for enhanced bass response and a balanced, detailed sound profile.
- Equipped with a newly developed EXO Precision AirMotion tweeter and GDC Waveguide for precise sound dispersion.
- Designed with low-diffraction enclosure to minimize edge reflections and optimize sound clarity.
- Ideal for professional producers and sound engineers requiring high sound levels and linear performance.
- Suitable for immersive applications like Dolby Atmos due to its controlled dispersion characteristics.
- Stand Art Monitor Stands are adjustable from 80 to 130 cm, supporting speakers up to 35 kg.
- Set includes power cables and features Ethernet connectivity for the EVE Control App.
- Perfect nearfield monitor for high precision and deep sound.
- Features a 6.5" woofer for extended bass and balanced, detailed audio.
- Advanced EXO Precision AirMotion tweeter and GDC waveguide for clear stereo imaging.
- Low-Diffraction enclosure design reduces edge reflections.
- Ideal for producers and engineers needing linear sound and reliability.
- Controlled radiation pattern suits immersive applications like Dolby Atmos.
- Back panel includes integrated OLED display and SMART Control Knob.
- Dimensions: 234 x 344 x 280 mm; available in black.
- Set includes 2 EVE Audio EXO 25 monitors and 1 EVE Audio TS108 subwoofer.
- EXO 25 monitors feature a 5" woofer for extended bass response and detailed sound reproduction.
- Equipped with EVE Control App for enhanced acoustic optimization and control.
- Utilizes a newly developed Precision AirMotion tweeter for precise sound dispersion and clarity.
- TS108 subwoofer features an 8" driver with accurate passive diaphragm for low distortion bass down to 29Hz.
- Remote control allows convenient adjustment of subwoofer parameters from the listening position.
- Ideal for professional studios, ambitious producers, and immersive applications like Dolby Atmos.
- Dimensions include monitors at 195 x 284 x 230 mm and subwoofer at 280 x 415 x 365 mm; total weight 11.5 kg.
- Set includes 2 EVE Audio EXO 25 nearfield monitors and 2 Stand Art Studio Monitor Stands.
- EXO 25 features a 5" woofer for enhanced bass and a balanced, detailed sound profile.
- Equipped with a newly developed Precision AirMotion tweeter and GDC Waveguide for accurate sound dispersion and spatial imaging.
- Optimized low-diffraction enclosure design reduces edge reflections and ensures high transparency.
- Ideal for professional studios and immersive applications like Dolby Atmos, with controlled dispersion characteristics.
- Stand Art Monitor Stands are adjustable (80-130 cm), support speakers up to 35 kg, and feature a slip-resistant surface.
- EXO 25 specifications: Frequency range of 44 Hz - 24 kHz, max SPL of 116 dB, and includes XLR and RCA inputs.
- Comes with integrated OLED display and SMART Control Knob for easy manual frequency correction.
- Nearfield monitor designed for high precision and depth in sound.
- Features a 5" woofer for enhanced bass response and a balanced, detailed audio profile.
- Equipped with an EXO Precision AirMotion tweeter and GDC Waveguide for accurate sound dispersion.
- Low-diffraction enclosure with rounded edges to minimize edge reflections.
- Frequency response of 44 Hz - 24 kHz and a maximum SPL of 116 dB.
- Rear integrated OLED display and SMART Control Knob for easy operation.
- Ethernet connectivity for EVE Control App compatibility.
- Ideal for professional studios, ambitious producers, and immersive applications like Dolby Atmos.
- Includes a pair of EVE Audio EXO 24 studio monitors and two Stand Art Studio Monitor Stands.
- EXO 24 features a new Precision AirMotion tweeter and GDC Waveguide for precise sound dispersion and detailed stereo imaging.
- Equipped with a powerful 4" coated aluminum woofer for impressive bass and clear mids.
- Optimized low-diffraction enclosure design reduces unwanted edge reflections.
- Ideal for professional studios, ambitious producers, and discerning home users with limited space.
- Controlled directivity makes it suitable for immersive applications like Dolby Atmos.
- Stand Art Studio Monitor Stands have a height range of 80-130 cm and support speakers up to 35 kg.
- Each EXO 24 monitor has multiple connectivity options, including XLR and SPDIF inputs, and features an integrated OLED display for controls.
- Type: Nearfield Monitor, 2-Way Active design
- Drivers: 1x 4" Low-Frequency driver and AirMotion Ribbon High-Frequency driver
- Frequency Range: 54 Hz - 24 kHz (+/-3 dB)
- Maximum SPL: 108 dB
- Inputs: XLR and RCA, with digital SPDIF coaxial input; no 6.3mm or 3.5mm inputs
- Control: Rear-mounted OLED display and SMART Control Knob for manual frequency adjustment
- Connectivity: Ethernet for EVE Control App; no Bluetooth
- Dimensions: 171 x 250 x 194 mm; available in black; sold individually
- Limited Edition Grand Concert acoustic guitar
- Fully solid construction with European spruce top and mahogany back/sides
- Advanced Scalloped X-Bracing for enhanced sound quality
- Ebony fingerboard with custom black wood inlays and mahogany neck
- Equipped with Fishman Matrix Infinity pickup and preamp system
- High-gloss UV finish in Burgundy top and natural body
- Features include a cutaway, dual monitor soundholes, and an armrest
- Includes a case; made in China
- Limited edition color: Calm Blue
- Compact digital piano with built-in speakers and high-quality hammer-action keyboard
- 88 Smart Scaled Hammer Action keys for an authentic playing experience
- Multi-Dimensional Morphing AiR sound generation with 18 sound colors
- 192-note polyphony and various piano effects (e.g., damper resonance, key release sounds)
- Includes metronome, MP3/Wave player/recorder (up to 99 songs)
- Bluetooth® Audio and MIDI connectivity, as well as compatibility with Chordana Play for Piano app
- Lightweight at 11.2 kg, dimensions: 1322 x 102 x 232 mm (without music stand)
- Limited special color in Mellow Beige
- Compact digital piano with built-in speakers and high-quality hammer action keyboard
- 88 keys with Smart Scaled Hammer Action for an authentic playing experience
- Multi-Dimensional Morphing AiR sound generation with 18 different tones
- 192-note polyphony and various piano effects (resonances, noises)
- Supports MP3/Wave playback/recording (up to 99 songs, 25 mins each)
- Connectivity options include USB to Host, USB to Device, Bluetooth® Audio, and MIDI
- Lightweight design (11.2 kg) with dimensions of 1322 x 102 x 232 mm (without music stand)
- Compact MIDI keyboard with 25 velocity-sensitive mini keys for precise musical expression.
- Features 8 assignable RGB pads for various DAW functions and real-time performance.
- Includes 8 knobs for parameter adjustments and dedicated pitch/modulation wheels for creative control.
- Built-in arpeggiator with pattern, freeze, and mutate functionalities expands composition options.
- USB-C powered with MIDI Out and 6.3 mm input for a sustain pedal.
- Lightweight design (1.05 kg) and compact dimensions (347.5 x 45.7 x 192 mm) for portability.
- Comes with pre-configured DAW scripts for major software including Ableton Live and Logic Pro.
- Includes a USB cable, software, and the exclusive Studio Instrument Collection with over 1,000 presets.
- Masterclass by Alex Werth: Learn from songwriter and producer with extensive industry experience.
- Focus Areas: Songwriting, sound design, efficient workflow, and live performance techniques.
- Interactive Experience: Engage in direct Q&A sessions and receive personalized feedback.
- Practical Applications: Gain actionable insights through live demonstrations and hands-on experiences with Nord instruments.
- Networking Opportunities: Connect with other musicians and share experiences.
- Inspiration and Motivation: Overcome creative blocks and discover fresh ideas for your music.
- Discounted Tickets: Reduced prices available for students, pupils, and individuals with disabilities (proof required).
- Event Details: Scheduled for October 29, 2025, from 18:00 to 20:30, with a minimum participation requirement of 25 attendees.
- Adapter for powering miniature microphones via 48V phantom power.
- Specifically designed for DPA miniature microphones.
- Includes a belt clip for convenient attachment.
- Active balanced design improves suppression of induced electromagnetic interference.
- Common mode rejection ratio (CMRR) exceeds 60 dB from 50 Hz to 15 kHz.
- Operates with a minimum phantom voltage of 12V; requires 48V ±4V for full specifications.
- Compatible with DPA microphones using Micro Dot / Micro Lock cables.
- Available with MicroLock® in 2025.
- Brand: Marca Unic
- Type: Jazz Alto Saxophone Reed, Strength 2.5
- Material: Hybrid natural and synthetic fibers
- Offers high flexibility and expressiveness with exceptional projection
- Designed for jazz, funk, and rock music styles
- Resistant to climatic and humidity changes
- Longevity of up to 6 months
- Packaging: Sold individually (1 piece)
- Country of production: France
- Dual amp in a box pedal based on the legendary Blues Breaker design.
- Features two channels with Voicing Switch (King of Tone/British Blues) and Gain Hi/Low Switch.
- Offers 3 switchable drive modes for versatile sound options.
- FX Loop included for integrating external pedals.
- Internal voltage switchable between 9V and 18V for increased headroom.
- True bypass mode for preserving the original signal.
- Dimensions: 127 x 66 x 171.45 mm; Weight: 1.0 kg.
- Manufactured in Taiwan; operates on 9V DC, center negative.
- Compact MIDI keyboard with 25 velocity-sensitive mini keys for precise musical expression.
- 8 assignable RGB pads for versatile functions in your DAW.
- 8 real-time adjustable knobs and integrated pitch/modulation wheels for enhanced sound control.
- Built-in arpeggiator with pattern, Arp Freeze, and Mutate features for creative composition.
- Easy navigation with a color display and additional menu encoder.
- USB-C powered; includes MIDI-Out and a 6.3 mm input for sustain pedal.
- Comes with preconfigured DAW scripts for seamless integration with major software like Ableton Live and FL Studio.
- Weighs only 1.05 kg, making it a portable solution for musicians on the go.
- Electro-mechanical synthesizer voice pedal with real-time pitch tracking.
- Produces raw, organic sounds from a rotating DC motor, offering unique tonal textures.
- Functions as a drone companion, ring modulator, and cross-modulated texture generator.
- Features innovative foot pedal control for dynamic sound manipulation (accelerate, brake, engage, and stall).
- Replaceable motor block for extended usage (3,000–5,000 hours of operation).
- Supports MIDI via USB and 5-Pin DIN connections.
- True bypass mode and operates on 9 - 12 Volt DC power supply.
- Suitable for guitar, bass, DJs, and harp players; boutique-quality effect.
- Peavey Rockmaster Preamp: Classic high-gain amp sound in a compact pedal format.
- Utilizes patented Trans Tube technology to replicate the legendary Rockmaster tone.
- Features an active 3-band EQ for enhanced sound shaping.
- Offers a switchable boost and significant gain reserves for versatile performance.
- Analog design with true bypass mode for pure signal integrity.
- Mono input and output for simple connectivity.
- Runs on 9V DC power supply (center negative) or can be powered by a 9V battery.
- Medium-sized housing, designed and produced in Taiwan.
- Texture Engine: Combines algorithms from Slö Reverb, Lore Reverse Reverb, and Fable Granular Generator.
- Effect Type: Digital reverb pedal designed for ambient sounds and unique textures.
- Limited Edition: Only 600 units available worldwide.
- Modes: 6 modes including Grain Cloud, Grain Verb, and Forward Reverse Verb, with 3 user presets.
- Controls: Features 5 adjustable knobs: Decay, Filter, Mix, X, and Stretch.
- Moment Feature: Allows automation of parameters with adjustable glide time (10/1000 to 5000 ms).
- Power Requirements: Operates on 9V DC, 100 mA, not battery-operated.
- Dimensions and Weight: Standard size (66 x 36 x 122 mm) and weighs 0.35 kg; suitable for acoustic guitars and bass.
- Versatile analog synthesizer suitable for studio work and live performances
- 37-key slim keyboard with velocity sensitivity and polyphonic aftertouch
- Fully analog sound generation enhanced by a four-pole resonant low-pass filter
- Two ADSR envelopes for precise sound shaping
- Integrated arpeggiator with sequencer mode for rhythmic and melodic creativity
- MIDI In/Out/Thru and USB-C connectivity for seamless integration
- Includes modulation wheel, pitch wheel, and a modulation matrix for sound design
- Lightweight design (3.97 kg) with compact dimensions (562 x 70 x 251 mm)
- Looper and Drum Machine: Combines looping capabilities with a built-in drum machine featuring 220 patterns in 11 styles.
- Extensive Recording Time: Offers up to 800 minutes of recording time with 100 available memory slots for loops.
- User-Friendly Touch Screen: Intuitive touch screen interface for easy operation and navigation.
- Bluetooth Audio Integration: Allows playback of Bluetooth audio, which can be included in loop recordings.
- Versatile Connectivity: Features XLR mic input with 48V phantom power, TRS MIDI, stereo output, USB-C for software connection, and headphone jack.
- Advanced Features: Includes time stretching, automatic drum matching, and flexible I/O modes.
- Power Requirements: Operates on 9 VDC power supply (not battery-operated) with a consumption of 500 mA.
- Compact Design: Dimensions are 146 x 53.2 x 115.6 mm, weighing only 0.37 kg, suitable for acoustic guitar and bass.
- Ultra-compact tube amplifier with integrated IR Loader
- 20 Watts of power with two channels sharing a 3-band EQ
- Features a power soak with settings for 20/5/1 Watt and speaker off
- Includes an IR Loader with 4 slots (3 user slots) for flexible sound options
- Equipped with headphone output and USB interface for easy recording and practice
- Weighs only 6.05 kg and measures 34.5 x 16 x 19.5 cm
- Built with 2x 12AX7 preamp tubes and 2x EL84 power tubes
- Manufactured in Germany, ideal for rehearsal spaces, club gigs, and recording sessions
- Based on the classic Tone Bender MK III circuit with modern updates.
- Features a 3 Germanium Transistor Fuzz design for versatile sound options.
- Expanded controls: 2-band EQ, BIAS control, Blend knob, and Fat switch for enhanced tone shaping.
- Clip switch allows toggling between Germanium and LED clipping diodes.
- True bypass mode for preserving signal integrity.
- Powered by standard 9V DC (center negative) with a low consumption of 12 mA; battery operation possible.
- Impedance Adjust trimmer for compatibility with various effects pedals.
- Compact dimensions of 70 x 50.3 x 114.3 mm, suitable for bass guitars as well.
- Limited Edition Electro Harmonix Bender Royale MK III in vibrant orange.
- Inspired by the classic Tone Bender MK III, featuring a 3 Germanium Transistor Fuzz design.
- Expanded control options: 2-band EQ, BIAS control for fuzz versatility, and Blend knob for direct signal mixing.
- Includes Fat Switch for enhanced mids and lows, and Clip Switch for selecting Germanium or LED clipping diodes.
- True Bypass mode for maintaining signal integrity, with a standard 9V DC center negative power supply.
- Internal Impedance Adjust trimmer for optimal compatibility with various instruments and effects.
- Compact dimensions: 70 x 50.3 x 114.3 mm; suitable for both guitar and bass.
- Power consumption of 12 mA; can also operate on a standard 9V battery.
- Compact AXE I/O Solo audio interface designed for guitar and bass sound shaping.
- Features Z-Tone technology for adjustable input impedance (1 mOhm to 2.2 kOhm) for tonal customization.
- Supports reamping with a noise-free, ground-isolated 6.3mm output for easy amp connections.
- Includes essential software: AmpliTube 5, TONEX, T-Racks CS, and Ableton Live 11 Lite.
- Dual input channels with XLR/line combo inputs and Hi-Z input for versatile connectivity.
- USB-powered with a maximum sample rate of 192 kHz and 24-bit resolution.
- Compatible with macOS 10.11 and higher, Windows 7 and higher.
- Bundle includes interface, 1.5m USB cable, and various software for enhanced music production.
- Compact audio interface for mixing up to 3 audio sources into a mono output
- Compatible with all streaming apps and supports loopback audio
- Mobile device compatibility: iOS and Android
- Input channels: 3 (Mic-In TRRS, Line-In RCA L/R)
- Headphone output: 3.5 mm TRRS jack
- Direct monitoring capability for real-time audio feedback
- Battery-powered with a 50-hour operational duration
- Dimensions: 45 x 105 x 34 mm, weighs only 0.074 g
- Compact guitar audio interface compatible with iPhone, iPad, Android, Mac, and PC.
- Features multicolored LEDs that can serve as a tuner for connected instruments.
- Integrated Loopback+ function allows seamless streaming between apps, perfect for social media.
- Live-optimized multifunction knob for easy control while playing.
- Ideal for guitarists and bassists to perform and record at a high level.
- Includes Lightning and USB-C cables, plus free downloads of AmpliTube 5SE, TONEX SE, and more.
- Supports a maximum sample rate of 96 kHz and 24-bit resolution, with a dynamic range of 115 dB.
- USB-powered and weighs only 0.055 kg, making it highly portable.
- Compact 4x2 Audio Interface with MIDI connections and two iRig MIC XY stereo microphones.
- Compatible with iPhones, iPads, Android devices, Macs, PCs, and DSLR cameras for versatile use.
- Ideal for field recording and content creation without the need for an SD card.
- Supports internal multitrack, stereo, or mono modes, with safety features for distortion protection.
- Built-in MEMS microphone with a frequency response of 30 Hz to 20 kHz and max SPL of 110 dBSPL.
- Features a limiter for inputs 1 and 2 to prevent clipping during recordings.
- Powered by batteries, external power supply, or USB for flexible operation.
- Includes a complete package: interface, cables, microphones, windscreen, carrying case, power supply, and MIDI cable.
